If you own a Galaxy M21s F41 SM-F415F/DS smartphone and are looking to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy M21s F41 SM-F415F/DS U2 With 2023-02-01 (February 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.
Samsung Galaxy M21s / F41 SM-F415F/DS Binary 2 Android 12 Brazil ZTO F415FUBU2CWF1
Benefits of Updating Firmware
There are various reasons to flash “Stock Firmware on Galaxy M21s F41 SM-F415F/DS U2. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Preparation:
- Supported Phone: Galaxy M21s F41 SM-F415F/DS U2
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install Samsung USB Driver
- Download Odin’s Latest version
How To Install Galaxy M21s F41 SM-F415F/DS U2 Stock Firmware:
Download Galaxy M21s F41 SM-F415F/DS U2 Latest Firmware:
SM-F415F/DS U2 Brazil ZTO F415FUBU2CWF1:
Model | SM-F415F/DS Binary 2 U2, S2, Bit 2 |
Region / Country | Brazil |
Language | Multi-Language |
Android version | Android 12 S |
Operator / Carrier | Clean ZTO (no logo, carrier apps) |
AP / PDA | F415FUBU2CWF1 |
CSC | F415FOWO2CWF1 |
Modem CP Version / Baseband | F415FDDU2CWF1 |
product code | ZTO |
Model References | SM-F415FZKBZTO, SM-F415FZBBZTO, SM-F415FZBRZTO, SM-F415FZKRZTO |
Build Date | 2023-06-19 |
Security Patch Level | 2023-05-01 (May 1, 2023) |
Size | 4.2GB |
Download | Mega | Google Drive |
1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.
2: Download and extract the Galaxy M21s F41 SM-F415F/DS U2 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button, and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once the Firmware process is completed, you will be able to see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy M21s F41 SM-F415F/DS U2 finally boots up, you should be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy M21s F41 SM-F415F/DS U2 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from the use of the information in this guide.
- Phone must have a 70–80% charge.
Troubleshooting
If you encounter any problems during the firmware update process, here are a few things you can try:
- Restart your device and retry the installation process.
- Ensure your device has sufficient battery.
- If you continue to encounter problems, you may need to perform a factory reset on your device.
Conclusion
Installing the latest firmware on your Galaxy M21s F41 SM-F415F/DS U2 can bring several improvements to your device, including bug fixes and new features. By following the steps in this guide, you can update your device to the latest firmware successfully.