The specific Galaxy M11 SM-M115F U3 Firmware Download Package comes with a Stock ROM of Galaxy M11 SM-M115F U3 Security Patch Level 2022-01-01 January 2022. This helps bypass FRP lock and revert from the root and custom ROM.
Samsung Galaxy M11 SM-M115F Binary 3 Firmware – Android 11 R – AFR – M115FXXU3BVA3 – Kenya
There are various reasons to flash “Stock Firmware on Galaxy M11 SM-M115F U3“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
Suppose you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.
The Advantages Of Galaxy M11 SM-M115F U3 Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy M11 SM-M115F U3
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy M11 SM-M115F U3 Stock ROM Details:
SM-M115F U3 Firmware – AFR – M115FXXU3BVA3 – Kenya:
Model | SM-M115F Binary 4 U4, S4, Bit 4 |
Region / Country | Kenya |
Language | Multi-Language |
Android version | Android 11 R |
Operator / Carrier | Clean (no logo, operator apps) |
PDA | M115FXXU3BVA3 |
CSC | M115FOJM3BVA3 |
MODEM CP Version | Kenya |
product code | AFR |
Build Date | 20220125193050 |
Security Patch Level | 2022-01-01 January 2022 |
Size | 3.28 GB Full Files |
Download | Google Drive | Android File Host |
How To Install Galaxy M11 SM-M115F U3 Stock Firmware:
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy M11 SM-M115F U3 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
You should run your desired firmware when your Galaxy M11 SM-M115F U3 finally boots up.
If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy M11 SM-M115F U3 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.