SM-M115F Binary 3 Firmware

The specific Galaxy M11 SM-M115F U3 Firmware Download Package comes with a Stock ROM of Galaxy M11 SM-M115F U3 Security Patch Level 2022-01-01 January 2022. This helps bypass FRP lock and revert from the root and custom ROM.

Samsung Galaxy M11 SM-M115F Binary 3 Firmware – Android 11 R – AFR – M115FXXU3BVA3 – Kenya

There are various reasons to flash “Stock Firmware on Galaxy M11 SM-M115F U3“. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

Suppose you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Galaxy M11 SM-M115F U3 Stock ROM:

  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty.


Galaxy M11 SM-M115F U3 Stock ROM Details:

SM-M115F U3 Firmware – AFR – M115FXXU3BVA3 – Kenya:

Model SM-M115F Binary 4 U4, S4, Bit 4
Region / Country Kenya
Language Multi-Language
Android version Android 11 R
Operator / Carrier Clean (no logo, operator apps)
MODEM CP Version Kenya
product code AFR
Build Date 20220125193050
Security Patch Level 2022-01-01 January 2022
Size 3.28 GB Full Files
Download Google Drive Android File Host

How To Install Galaxy M11 SM-M115F U3 Stock Firmware:

Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, Skip this Step.


2: Download and extract the  Galaxy M11 SM-M115F U3 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you must boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: You can see a Warning Yellow Triangle Sign in the Download mode. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then, connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.

8: Once Odin detects your device, click the PDA button and select the Firmware.tar file.


9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed, you can see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.

Once you see the Pass message in Odin, you can disconnect your Device from the computer.

The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot but don’t be alarmed.

You should run your desired firmware when your Galaxy M11 SM-M115F U3 finally boots up.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”


  • Please read and understand the Full Guide before flashing “Galaxy M11 SM-M115F U3 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from using the information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

Comments are closed.