The specific Galaxy M10 SM-M105Y U8 Firmware Download Package has a Stock ROM of Galaxy M10 SM-M105Y U8. This helps bypass FRP lock and revert from the root and custom ROM.
Samsung Galaxy M10 SM-M105Y Binary 8 Firmware – Android 10 Q – XTC – M105YDXS8CVA1 – Philippines
There are various reasons to flash “Stock Firmware on Galaxy M10 SM-M105Y U8“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy M10 SM-M105Y U8
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy M10 SM-M105Y U8 Stock ROM Details:
SM-M105Y U8 Firmware XTC – M105YDXS8CVA1 – Philippines:
| Model | SM-M105Y Binary 8 U8, S8, Bit 8 |
| Region / Country | Canada |
| Language | Multi-Language |
| Android version | Android 10 Q |
| Operator / Carrier | Clean (no logo, carrier apps) |
| PDA | A505U1UESHDVB1 |
| CSC | A505U1OYMHDVB1 |
| MODEM CP Version | Canada |
| product code | BMC |
| Build Date | 20220209210730 |
| Security Patch Level | – |
| Size | 2.33 GB Full Files |
| Download | Google Drive | Android File Host |
How To Install Galaxy M10 SM-M105Y U8 Stock Firmware:
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy M10 SM-M105Y U8 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy M10 SM-M105Y U8 finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy M10 SM-M105Y U8 Firmware“.
- Use these instructions at your own risk.
- Phone must have a 70–80% charge.