Galaxy M10 SM-M105M U8 Firmware – Android 10 Q

SM-M105M Binary 8 Firmware

The specific Galaxy M10 SM-M105M U8 Firmware Download Package comes with a Stock ROM of Galaxy M10 SM-M105M U8 Security Patch Level 2022-06-01 – June 1, 2022. This helps bypass FRP lock and revert from the root and custom ROM.

Samsung Galaxy M10 SM-M105M Android 10 Q Binary 8 M105MUBU8CVF2

There are various reasons to flash “Stock Firmware on Galaxy M10 SM-M105M U8“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade, remove and unlock FRP
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy M10 SM-M105M U8 Stock ROM Details:

Galaxy M10 SM-M105M Android 10 Q Binary 8 M105MUBU8CVF2:

Model SM-M105M Binary 8 U8, S8, Bit 8
Region / Country Brazil
Language Multi-Language
Android version Android 10 Q
Operator / Carrier Clean ZTO – no logo, carrier apps
AP / PDA M105MUBU8CVF2
CSC M105MOWO8CVF2
CP Version / Baseband Modem M105MUBU8CVF2
product code ZTO
Build Date / Upload 2022-06-02 / 5 Jul 22
Security Patch Level 2022-06-01 – June 1, 2022
Size 2.3 GB
[quads id=2]
Brazil – ZTO Mega  Google Drive
Argentina – rim Mega Google Drive
Chile – CHO Mega MediaFire
ARO – Argentina Google Drive

How To Install Galaxy M10 SM-M105M U8 Stock Firmware:

1: Download and Install the Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the  Galaxy M10 SM-M105M U8 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you can see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

6: Open Odin. Then, connect your phone to the pc.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.

8: Once Odin detects your device, click the PDA button, and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your Galaxy M10 SM-M105M U8 finally boots up, you should run your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy M10 SM-M105M U8 Firmware.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.

Leave a Reply

Your email address will not be published. Required fields are marked *