Galaxy M10 SM-M105M U7 Firmware – M105MUBS7CUC1
The specific Galaxy M10 SM-M105M U7 Firmware Download Package comes with a Stock ROM of Galaxy M10 SM-M105M U7 Security Patch Level 2021-12-01 (1 December 2021). This helps bypass FRP lock and revert from the root and custom ROM.
Samsung Galaxy M10 SM-M105M Binary 7 Android 10 Q Brazil ZTO – M105MUBS7CUC1
There are various reasons to flash “Stock Firmware on Galaxy M10 SM-M105M U7“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Prerequisites:
- Supported Phone: Galaxy M10 SM-M105M U7
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy M10 SM-M105M U7 Stock ROM Details:
SM-M105M U7 Brazil ZTO – M105MUBS7CUC1:
Model | SM-M105M Binary 7 U7, S7, Bit 7 |
Region / Country | Brazil |
Language | Multi-Language |
Android version | Android 10 Q |
Operator / Carrier | Clean ZTO (without logo, operator apps) |
PDA | M105MUBS7CUC1 |
CSC | M105MOWO7CUC1 |
Product code | ZTO |
Build Date | Thu, 18 Mar 2021 |
Security Patch Level | 2021-03-01 (March 1, 2021) |
Size | 2.3 GB |
Download | Google Drive | Android File Host |
How To Install Galaxy M10 SM-M105M U7 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy M10 SM-M105M U7 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy M10 SM-M105M finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy M10 SM-M105M U7 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.