The specific Galaxy M02 SM-M022G U3 Firmware Download Package comes with a Stock ROM of Galaxy M02 SM-M022G U3 Security Patch Level 2022-07-01 (July 1, 2022). This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy M02 SM-M022G Binary 3 Android 11 R India INS M022GXXU3BVG6
There are various reasons to flash “Stock Firmware on Galaxy M02 SM-M022G U3“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
Pre-requirements:
- Supported Phone: Galaxy M02 SM-M022G U3
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy M02 SM-M022G U3 Stock ROM Details:
SM-M022G U3 India INS M022GXXU3BVG6:
Model | SM-M022G Binary 3 U3, S3, Bit 3 |
Region / Country | India |
Language | Multi-Language |
Android version | Android 11 R |
Operator / Carrier | Clear INS (no logo, carrier apps) |
AP / PDA | M022GXXU3BVG6 |
CSC | M022GODM3BVH1 |
CP Version / Baseband Modem | M022GXXU3BVG6 |
product code | INS |
Build Date | 2022-07-25 |
Security Patch Level | 2022-07-01 (July 1, 2022) |
Size | 2.9 GB |
Download | Google Drive | Mega |
How To Install Galaxy M02 SM-M022G U3 Stock Firmware:
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy M02 SM-M022G U3 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.
8: Click the PDA button, and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once the Firmware process is completed you can see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy M02 SM-M022G U3 finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy M02 SM-M022G U3 Firmware“.
- Use these instructions at your own risk.
- Phone must have a 70–80% charge.