Galaxy J7 Pro SM-J730G U4 Firmware – J730GUBU4ARF1

J7 Pro SM-J730G Binary 4 Firmware

The specific Galaxy J7 Pro SM-J730G U4 Firmware Download Package comes with a Stock ROM of Galaxy J7 Pro SM-J730G U4 Security Patch Level 2018-06-01 (1 June 2018). This helps you to bypass the FRP lock and revert from the root and custom ROM.

Galaxy J7 Pro SM-J730G Binary 4 Firmware – J730GUBU4ARF1

There are various reasons to flash “Stock Firmware on Galaxy J7 Pro SM-J730G U4“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy J7 Pro SM-J730G U4 Stock ROM Details:

Model SM-J730G Binary 4 U4, S4, Bit 4
Region / Country Brazil
Language Multi-Language
Android version Android 7.0 Nougat
Operator / Operator Clean ZTO (without logo, operator apps)
PDA J730GUBU4ARF1
CSC J730GZTO4ARF1
Product code ZTO
Build Date Mon, 25 Jun 2018
Security Patch Level 2018-06-01 (1 June 2018)
Size 1.9 GB
[quads id=2]
Download 4File Google Drive Android File Host

How To Install Galaxy J7 Pro SM-J730G U4 Stock Firmware:

How To Flash Samsung Stock Firmware With ODIN

1: Install the Samsung USB Driver on your pc.

2: Download and extract the Galaxy J7 Pro SM-J730G U4 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Open Odin. Then, connect your phone to the pc.

7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed, you can see a Green Box with a Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

You should run your desired firmware when your Galaxy J7 Pro SM-J730G U4 finally boots up.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy J7 Pro SM-J730G U4 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from the use of the information in this guide.
  • Phone must have a 70–80% charge.