The specific Galaxy J7 Pro SM-J730G U12 Firmware Download Package comes with a Stock ROM of Galaxy J7 Pro SM-J730G U12 Security Patch Level 2020-09-01 (1 September 2020). This helps bypass FRP lock and revert from the root and custom ROM.
Samsung Galaxy J7 Pro SM-J730G U12 Firmware
There are various reasons to flash “Stock Firmware on Galaxy J7 Pro SM-J730G U12“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Prerequisites:
- Supported Phone: Galaxy J7 Pro SM-J730G U12
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
Galaxy J7 Pro SM-J730G U12 Stock ROM Details:
Model | SM-J730G Binary 12 UC, SC, Bit C |
Region / Country | Brazil |
Language | Multi-Language |
Android version | Android 9 Pie |
Operator | Clean ZTO (without logo, operator apps) |
PDA | J730GUBSCCTI4 |
CSC | J730GZTOCCTI1 |
Product code | ZTO |
Build Date | 08 Sep 2020 |
Security Patch Level | 2020-09-01 (1 September 2020) |
Size | 1.8 GB |
Download |
Galaxy J7 Pro SM-J730G Binary 12 Android 9 Pie Brazil ZTA – J730GUBSCCTI2
Model | SM-J730G Binary 12 U12, S12, Bit 12 SC |
Region / Country | Brazil |
Language | Multi-Language |
Android version | Android 9 Pie |
Operator | ZTA course |
PDA | J730GUBSCCTI2 |
CSC | J730GZTACCTI1 |
Product code | ZTA |
Build Date | 08 Sep 2020 |
Security Patch Level | 2020-09-01 (September 1, 2020) |
Size | 2.2 GB |
Download |
Download Galaxy J7 Pro SM-J730G U12 Boot.img
boot.img J7 Pro SM-J730G J730GUBSCCTI4 for root on Magisk
Download |
How To Install Galaxy J7 Pro SM-J730G U12 Stock Firmware:
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy J7 Pro SM-J730G U12 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once the Firmware process is completed, you will see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy J7 Pro SM-J730G finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy J7 Pro SM-J730G U12 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.