Galaxy J7 Prime 2 (On7 Refresh) SM-G611MT Binary 7 – G611MTVJU7CTJ2

Galaxy J7 Prime 2 (On7 Refresh) SM-G611MT Binary 7

The specific Galaxy J7 Prime 2 (On7 Refresh) SM-G611MT U7 Firmware Download Package comes with a Stock ROM of Galaxy J7 Prime 2 (On7 Refresh) SM-G611MT U7 Security Patch Level 2021-01-01 (January 1, 2021). This helps you to bypass FRP lock and revert from the root and custom ROM.

Galaxy J7 Prime 2 (On7 Refresh) SM-G611MT Binary 7 Android 9 Pie Brasil Vivo ZVV – G611MTVJU7CTJ2

There are various reasons to flash “Stock Firmware on Galaxy J7 Prime 2 (On7 Refresh) SM-G611MT U7“. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to hard reset your phone and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Galaxy J7 Prime 2 (On7 Refresh) SM-G611MT U7 Stock ROM:

  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Pre-requirements:

Galaxy J7 Prime 2 (On7 Refresh) SM-G611MT U7 Stock ROM Details:

Region / Country Brazil
Language Multi-Language
Android version Android 9 Pie
Operator VIVO ZVV
PDA G611MTVJU7CTJ2
CSC G611MTZVV7CTJ1
Product code ZVV
Build Date 12 Oct 2020
Security Patch Level 2020-10-01 (1 October 2020)
Size 2.3 GB
Download 4File Google Drive

Galaxy J7 Prime 2 On7 Refresh SM-G611MT Binary 7 Android 9 Pie Brazil ZTO – G611MTVJU7CUA1

Model SM-G611MT Binary 7 U7, S7, Bit 7
Region / Country Brazil
Language Multi Linguagem / Language
Android version Android 9 Pie
Operator / Carrier Clean ZTO (without logo, operator apps)
PDA G611MTVJU7CUA1
CSC G611MTZTO7CUA1
Product code ZTO
Build Date Fri, 22 Jan 2021
Security Patch Level 2021-01-01 (January 1, 2021)
Size 1.8 GB
Download Google Drive Android File Host

Download Galaxy J7 Prime 2 (On7 Refresh) SM-G611MT U7 Boot.img

boot.img J7 Prime 2 SM-G611MT G611MTVJU7CTJ2 to root on Magisk without TWRP

Download Google Drive

How To Install Galaxy J7 Prime 2 (On7 Refresh) SM-G611MT U7 Stock Firmware:

Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the Galaxy J7 Prime 2 (On7 Refresh) SM-G611MT U7 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you need to boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will be able to see a Warning Yellow Triangle Sign. In this situation, you have to press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.

8: Once Odin detects your device, click on the PDA button, and select the Firmware.tar file.

9: Now, click on the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

The once Firmware process is completed you will be able to see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see, the Pass message in Odin, you can disconnect your Device from the computer.

The flashing process will begin and should take about 10–12 minutes. It may take some time for your device to reboot, but don’t be alarmed.

When your Galaxy J7 Prime 2 (On7 Refresh) SM-G611MT finally boots up, you should now be running your desired firmware.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”

Disclaimer:

  • Please read and understand the Full Guide before flashing “Galaxy J7 Prime 2 (On7 Refresh) SM-G611MT U7 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

Comments are closed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More