Galaxy J7 Plus SM-C710 U3 Firmware – C710FDXS3BTC1

Galaxy J7 Plus SM-C710 Binary 3 Firmware

The specific Galaxy J7 Plus SM-C710 U3 Firmware Download Package has a Stock ROM of Galaxy J7 Plus SM-C710 U3. This helps bypass the FRP lock and revert from the root and custom ROM.

Samsung Galaxy J7 Plus SM-C710 U3 C710FDXS 3 BTC1_C710FOLB3BTC1_XXV_8.1.0

There are various reasons to flash “Stock Firmware on Galaxy J7 Plus SM-C710 U3“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Prerequisites:

Galaxy J7 Plus SM-C710 U3 Stock ROM Details:

SM-C710 U3 C710FDXS 3 BTC1_C710FOLB3BTC1_XXV:

Model: SM-C710 Binary 3, U3, S3, Bit 3
Language: Multi-Language
Android version: Android 8 Oreo
Operator / Carrier: Clean (without logo, operator apps)
PDA: C710FDXS3BTC1
CSC: C710FOLB3BTC1
Size: 1.9 GB
[quads id=2]
OneDrive Google Drive GDrive3

How To Install Galaxy J7 Plus SM-C710 U3 Full Firmware:

1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, then Skip this Step.

2: Download and extract the Galaxy J7 Plus SM-C710 U3 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

You should run your desired firmware when your Galaxy J7 Plus SM-C710 U3 finally boots up.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy J7 Plus SM-C710 U3 Firmware.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.