The specific Galaxy J7 Plus SM-C710 U2 Firmware Download Package comes with a Stock ROM of Galaxy J7 Plus SM-C710 U2. This helps bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy J7 Plus SM-C710 U2 C710FDXS 2 ARH3_C710FOLB2ARH1_XXV_7.1.1
There are various reasons to flash “Stock Firmware on Galaxy J7 Plus SM-C710 U2“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
How To Install Galaxy J7 Plus SM-C710 U2 Full Firmware:
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy J7 Plus SM-C710 U2 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
You should run your desired firmware when your Galaxy J7 Plus SM-C710 U2 finally boots up.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
Read and understand the Full Guide before flashing.”Galaxy J7 Plus SM-C710 U2 Firmware“.
Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.