The Samsung Galaxy J6 Prime SM-J610F is a mid-range smartphone released in 2019. It has a 5.6-inch Super AMOLED display with an 18:9 aspect ratio, giving it more screen real estate than most phones of its size and price range.
- Advertisement -
The device runs on the Exynos 7870 octa-core processor and comes with 3GB of RAM and 32GB of internal storage which can be expanded up to 256 GB via a microSD card slot for additional storage space. In terms of camera, the phone features 13MP + 5MP dual rear cameras along with an 8 MP front selfie shooter for taking amazing photos or videos even in low light conditions.
The specific Galaxy J6 Prime SM-J610F U8 Firmware Download Package comes with a Stock ROM of Galaxy J6 Prime SM-J610F U8 Security Patch Level 2021-04-01 April 2021. This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy J6 Prime SM-J610F Binary 8 Firmware – Android 10 Q AFR – Kenya J610FXXS8CVL1
Benefits of Updating Firmware
Updating firmware can be a daunting task for many companies, but it is essential to keep up with the latest technology and ensure that their systems are running smoothly. Firmware updates provide nGalaxy J6 Prime SM-J610F U8ous benefits for businesses, from improved security to enhanced performance. By taking advantage of these advantages, firms can stay competitive in today’s marketplace and better serve their customers.
- Advertisement -
There are various reasons to flash “Stock Firmware on Galaxy J6 Prime SM-J610F U8“. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.
- Flash Stock ROM to solve the boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs on the phone
- To solve the lag or stutter
- By flashing Stock ROM, you can fix software issues.
- Revert back to stock to get your warranty.
- Supported Phone: Galaxy J6 Prime SM-J610F U8
- Charge your mobile: You may no less than a half charge.
- Laptop or PC: To execute this installation, you must use a PC or Laptop.
- Backup Android Phone
- Download and install Samsung USB Driver
- Download Odin’s Latest version
How To Install Galaxy J6 Prime SM-J610F U8 Stock Firmware:
Download Galaxy J6 Prime SM-J610F U8 Latest Firmware:
SM-J610F Binary 8 – Android 10 Q AFR – Kenya J610FXXS8CVL1
|Model||SM-J610F Binary 7 U7, S7, Bit 7|
|Region / Country||Kenya|
|Android version||Android 10 Q|
|Operator / Carrier||Clear AFR (no logo, carrier apps)|
|AP / PDA||J610FXXS8CVL1|
|Modem CP Version / Baseband||–|
|Security Patch Level||2021-04-01 April 2021|
|Size||2.66 GB Full Files|
Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.
- Advertisement -
How To Flash Samsung Stock Firmware With ODIN
1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.
2: Download and extract the Galaxy J6 Prime SM-J610F U8 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: After switching off the phone, you need to boot into Download Mode. To boot into download mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.
8: Once Odin detects your device, click on the PDA button, and select the Firmware.tar file.
9: Now, click on the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once the Firmware process is completed you will be able to see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.
Once you see, the Pass message in Odin, you can disconnect your Device from the computer.
The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot, but don’t be alarmed.
When your Galaxy J6 Prime SM-J610F U8 finally boots up, you should now be running your desired firmware.
If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”