Galaxy J5 Pro SM-J530G Binary 8 Firmware

The specific Galaxy J5 Pro SM-J530G U8 Firmware Download Package has a Stock ROM of Galaxy J5 Pro SM-J530G U8 Security Patch Level 2020-09-01 (1 September 2020). This helps bypass FRP lock and revert from the root and custom ROM.

Advertisement

Samsung Galaxy J5 Pro SM-J530G Binary 8 Android 9 Pie Brasil ZTO – J530GUBS8CTI2

There are various reasons to flash “Stock Firmware on Galaxy J5 Pro SM-J530G U8“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Return to stock for warranty coverage.

Prerequisites:

Galaxy J5 Pro SM-J530G U8 Stock ROM Details:

SM-J530G U8 Brasil ZTO – J530GUBS8CTI2:

Model SM-J530G Binary 8 U8, S8, Bit 8
Region / Country Brazil
Language Multi-Language
Android version 9 Pie
Operator Clean ZTO (without logo, operator apps)
PDA J530GUBS8CTI2
CSC J530GZTO8CTI2
Product code ZTO
Build Date 09 Sep 2020
Security Patch Level 2020-09-01 (1 September 2020)
Size 2.3 GB
[quads id=2]
Download Google Drive Android File Host

Download Galaxy J5 Pro SM-J530G U8 Boot.img

boot.img J5 Pro SM-J530G J530GUBS8CTI2 for root on Magisk

Download Google Drive

How To Install Galaxy J5 Pro SM-J530G U8 Stock Firmware:

1: Install the Samsung USB Driver on your pc.

2: Download and extract the Galaxy J5 Pro SM-J530G U8 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Open Odin. Then, connect your phone to the pc.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed, you will see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your Galaxy J5 Pro SM-J530G finally boots up, you should run your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy J5 Pro SM-J530G U8 Firmware.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.