HomeSamsungGalaxy J4+ SM-J415G/DS Binary 6 Firmware - Android 9 Pie

Galaxy J4+ SM-J415G/DS Binary 6 Firmware – Android 9 Pie

Galaxy J4+ SM-J415G/DS Binary 6 Firmware

The specific Galaxy J4+ SM-J415G/DS U6 Firmware Download Package comes with a Stock ROM of Galaxy J4+ SM-J415G/DS U6 Security Patch Level 2020-12-01 (December 1, 2022). This helps you to bypass FRP lock and revert from the root and custom ROM.

Samsung Galaxy J4+ SM-J415G/DS Binário 6 Android 9 Pie Brazil ZTO J415GUBS6BVK3

There are various reasons to flash “Stock Firmware on Galaxy J4+ SM-J415G/DS U6“. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to hard reset your phone and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Galaxy J4+ SM-J415G/DS U6 Stock ROM:

  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Pre-requirements:

Galaxy J4+ SM-J415G/DS U6 Stock ROM Details:

Galaxy J4+ SM-J415G/DS Binário 6 Android 9 Pie Brazil ZTO J415GUBS6BVK3:

ModelSM-J415G/DS Binary 6 U6, S6, Bit 6
Region / CountryBrazil
LanguageMulti-Language
Android versionAndroid 9 Pie
Operator / CarrierClean ZTO (no logo, carrier apps)
AP / PDAJ415GUBS6BVK3
CSCJ415GOWO6BUD2
Modem CP Version / BasebandJ415GUBU6BUD1
product codeZTO
Build Date2022-11-17
Security Patch Level2020-12-01 (December 1, 2022)
Size2.4GB
[quads id=2]
Download MegaGoogle Drive

SM-J415G/DS Binary 6 Android 9 Pie Brazil Claro ZTA J415GUBS6BVK2:

ModelSM-J415G/DS Binary 6 U6, S6, Bit 6
Region / CountryBrazil
LanguageMulti-Language
Android versionAndroid 9 Pie
Operator / Operator / Carrierclear ZTA
AP / PDAJ415GUBS6BVK2
CSCJ415GOWA6BUD2
Modem CP Version / BasebandJ415GUBU6BUD1
product codeZTA
Build Date2022-11-16
Security Patch Level / Security2020-12-01 (December 1, 2022)
Size2.5GB
Brazil – ZTAMegaGoogle Drive
Brazil – Tim ZTMMegaGoogle Drive
Brazil Vivo ZVVMega
Google Drive

How To Install Galaxy J4+ SM-J415G/DS U6 Stock Firmware:

Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the  Galaxy J4+ SM-J415G/DS U6 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you need to boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will be able to see a Warning Yellow Triangle Sign. In this situation, you have to press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.

8: Once Odin detects your device, click on the PDA button, and select the Firmware.tar file.

9: Now, click on the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once the Firmware process is completed you will be able to see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see, the Pass message in Odin, you can disconnect your Device from the computer.

The flashing process will begin and should take about 10–12 minutes. It may take some time for your device to reboot, but don’t be alarmed.

When your Galaxy J4+ SM-J415G/DS U6 finally boots up, you should now be running your desired firmware.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”

Disclaimer:

  • Please read and understand the Full Guide before flashing “Galaxy J4+ SM-J415G/DS U6 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

- Advertisment -

Most Popular

- Advertisment -