SM-J410G/DS Binary 1 Firmware

The specific Galaxy J4 Core SM-J410G/DS U1 Firmware Download Package comes with a Stock ROM of Galaxy J4 Core SM-J410G/DS U1 Security Patch Level 2020-12-01 (December 1, 2020). This helps you to bypass the FRP lock and revert from the root and custom ROM.

Advertisement

Samsung Galaxy J4 Core SM-J410G/DS Binary 1 Android 8.1.0 Oreo Brazil Hi ZTR J410GUBS1AVK2

There are various reasons to flash “Stock Firmware on Galaxy J4 Core SM-J410G/DS U1“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Return to stock for warranty coverage.

Pre-requirements:

Galaxy J4 Core SM-J410G/DS U1 Stock ROM Details:

SM-J410G/DS U1 Brazil Hi ZTR J410GUBS1AVK2:

Model SM-J410G/DS Binary 1 U1, S1, Bit 1
Region / Country Brazil
Language Multi-Language
Android version Android 8.1.0 Oreo
Operator / Carrier Hi ZTR
AP / PDA J410GUBS1AVK2
CSC J410GZTR1ATL3
Modem CP Version / Baseband J410GUBU1ATI1
product code ZTR
Build Date 2022-11-01
Security Patch Level 2020-12-01 (December 1, 2020)
Size 902 MB
[quads id=2]
Brazil – ZTR MediaFire Google Drive
Brazil – Claro ZTA MediaFire Google Drive
Brazil – ZTM MediaFire Google Drive
Brazil – Vivo ZVV MediaFire Google Drive
Brazil – ZTO MediaFire Google Drive

How To Install Galaxy J4 Core SM-J410G/DS U1 Stock Firmware:

1: Download and Install Samsung USB Driver on your computer. If the Samsung USB Driver is already installed on your computer, Skip this Step.

2: Download and extract the  Galaxy J4 Core SM-J410G/DS U1 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: Boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button, and choose the Firmware.tar file.

9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you see the Pass message in Odin, you can disconnect your device from the pc.

When your Galaxy J4 Core SM-J410G/DS U1 finally boots up, you should now be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy J4 Core SM-J410G/DS U1 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
  • Phone must have a 70–80% charge.

LEAVE A REPLY

Please enter your comment!
Please enter your name here