The specific Galaxy J2 Core SM-J260M U13 Firmware Download Package has a Stock ROM of Galaxy J2 Core SM-J260M U13 Security Patch Level 2021-09-01 (September 1, 2021). This helps bypass the FRP lock and revert from the root and custom ROM.
Advertisement
Samsung Galaxy J2 Core SM-J260M U13 Firmware
There are various reasons to flash “Stock Firmware on Galaxy J2 Core SM-J260M U13“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.
How To Install Galaxy J2 Core SM-J260M U13 Stock Firmware:
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy J2 Core SM-J260M U13 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you can see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once the Firmware process is done, a Green Box with “Pass” will appear in Odin. The Smartphone will reboot automatically.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer. The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot, but don’t be alarmed.
When your Galaxy J2 Core SM-J260M finally boots up, you should be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
Read and understand the Full Guide before flashing.”Galaxy J2 Core SM-J260M U13 Firmware“.
Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from using information in this guide.