Galaxy Fold SCV44 Firmware

The specific Galaxy Fold SCV44 Firmware Download Package has a Stock ROM of Galaxy Fold SCV44. This helps bypass FRP lock and revert from the root and custom ROM.

Advertisement

Samsung Galaxy Fold SCV44 Firmware

There are various reasons to flash “Stock Firmware on Galaxy Fold SCV44“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy Fold SCV44 Stock ROM Details:

AP VERSION CSC VERSION Code Type OS Size DOWNLOAD
SCV44KDU 1 BTD1 SCV44QDI1BTD1 KDI FULL 10 Q 3.9G DOWNLOAD
SCV44KDU 1 ATA1 SCV44QDI1ATA1 KDI FULL 9 Pie 3.8G DOWNLOAD
SCV44KDU 1 ASKC SCV44QDI1ASKC KDI KDI 9 Pie 3.8G DOWNLOAD
SCV44KDU 1 ASI8 SCV44QDI1ASI8 KDI KDI 9 Pie 3.8G DOWNLOAD
[quads id=2]

How To Install Galaxy Fold SCV44 Stock Firmware:

How To Flash Samsung Stock Firmware With ODIN

1: Install the Samsung USB Driver on your pc.

2: Download and extract the Galaxy Fold SCV44 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Open Odin. Then, connect your phone to the pc.

7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your Galaxy Fold SCV44 finally boots up, you should run your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy Fold SCV44 Firmware.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.