Home Stock Firmware Samsung Galaxy F41 SM-F415F U2 Firmware – Android 12 S

Galaxy F41 SM-F415F U2 Firmware – Android 12 S

Galaxy F41 SM-F415F Binary 2

The specific Galaxy F41 SM-F415F U2 Firmware Download Package comes with a Stock ROM of Galaxy F41 SM-F415F U2 Security Patch Level 2022-05-01 (May 1, 2022). This helps bypass FRP lock and revert from the root and custom ROM.

Samsung Galaxy F41 SM-F415F Android 12 Binary 2 Brazil ZTO F415FUBS2CVF1

There are various reasons to flash “Stock Firmware on Galaxy F41 SM-F415F U2“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy F41 SM-F415F U2 Stock ROM Details:

SM-F415F Android 12 U2 Brazil ZTO F415FUBS2CVF1:

Model SM-F415F Binary 2 U2, S2, Bit 2
Region / Country Brazil
Language Multi-Language
Android version Android 12 S
Operator / Carrier Clean ZTO – no logo, carrier apps
AP / PDA F415FUBS2CVF1
CSC F415FOWO2CVF1
CP Version / Baseband Modem F415FDDS2CVF1
product code ZTO
Build Date / Upload 2022-05-30
Security Patch Level 2022-05-01 (May 1, 2022)
Size 4.1 GB
[quads id=2]
Download MEGA GOOGLE DRIVE

How To Install Galaxy F41 SM-F415F U2 Stock Firmware:

1: Install the Samsung USB Driver on your pc.

2: Download and extract the  Galaxy F41 SM-F415F U2 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: Boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you can see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

6: Open Odin. Then, connect your phone to the pc.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your Galaxy F41 SM-F415F U2 finally boots up, you should run your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy F41 SM-F415F U2 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from using information in this guide.
  • Phone must have a 70–80% charge.

NO COMMENTS

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Exit mobile version