Wednesday , December 2 2020

Samsung Galaxy Core Prime SM-G360H Firmware File [Stock ROM]

Core Prime SM-G360H Firmware File

The specific Galaxy Core Prime SM-G360H Stock Firmware Download Package comes with a Stock ROM of Galaxy Core Prime SM-G360H. This helps you to bypass FRP lock and revert form root and custom ROM.

Samsung Galaxy Core Prime SM-G360H Firmware File [Stock ROM]

There are various reasons to flash “Stock Firmware on Galaxy Core Prime SM-G360H“. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to hard reset your phone and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Pre-requirements to Install Galaxy Core Prime SM-G360H Stock ROM

Before going to install stock ROM you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing or updating the firmware.

Most smartphones automatically make a backup in the background, in case something happens. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

How To Install Galaxy Core Prime SM-G360H Firmware Update

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the Galaxy Core Prime SM-G360H Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you need to boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will be able to see a Warning Yellow Triangle Sign. In this situation, you have to press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.

8: Once Odin detects your device, click on the PDA button and select the Firmware.tar file.

9: Now, click on the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

The once Firmware process is completed you will be able to see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see, the Pass message in Odin, you can disconnect your Device from the computer.

Disclaimer:

  • Please read and understand the Full Guide before flashing “Galaxy Core Prime SM-G360H Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM on must have a 70–80% charge.

Samsung Galaxy Core Prime SM-G360H Stock ROM Details:

File Name: G360HDDU0AOA3_G360HODD0AOA1_INU.zip
Country: India
File Size: 481 MB
Android Version: 4.4.4
Get Link
File Name: G360HDDU0AOI2_G360HODD0AOI1_INS.zip
Country: India
File Size: 487 MB
Android Version: 4.4.4
Get Link

Check Also

Galaxy S9 + SM-G965U Binary 8 Firmware – G965USQU8FTJ3

The specific Galaxy S9 + SM-G965U U8 Firmware Download Package comes with a Stock ROM of …

Leave a Reply

Your email address will not be published. Required fields are marked *