A9 Sm A920f Binary 3 Firmware

The specific Galaxy A9 SM-A920F Binary 3 Firmware Download Package comes with a Stock ROM of Galaxy A9 SM-A920F U3 Security Patch Level 2020-07-01 (1 July 2020). This helps bypass the FRP lock and revert from the root and custom ROM.

Advertisement

Samsung Galaxy A9 SM-A920F U3 Android 10 Q Brazil ZTO -A920FXXS3CTG1

There are various reasons to flash “Stock Firmware on Galaxy A9 SM-A920F U3“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Prerequisites:

Galaxy A9 SM-A920F U3 Stock ROM Details:

SM-A920F U3 Brazil ZTO -A920FXXS3CTG1:

Model SM-A920F Binary 3 U3, S3, Bit 3
Region / Country Brazil
Language Multi-Language
Android version Android 10 Q
Operator Clean ZTO (without logo, operator apps)
PDA A920FXXS3CTG1
CSC A920FOXM3CTCH
Product code ZTO
Build Date Wed, 01 Jul 2020
Security Patch Level 2020-07-01 (1 July 2020)
Size 4.2 GB
[quads id=2]
Download 4File Google Drive Android File Host

How To Install Galaxy A9 SM-A920F U3 Stock Firmware:

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, then Skip this Step.

2: Download and extract the Galaxy A9 SM-A920F U3 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Open Odin. Then, connect your phone to the pc.

7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed, you will see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your Galaxy A9 SM-A920F finally boots up, you should run your desired firmware.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy A9 SM-A920F U3 Firmware.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.