Stock Firmware

Galaxy A8 2018 SM-A530F U16 Firmware – A530FXXSGCUA3

Galaxy A8 2018 SM-A530F Binary 16 Firmware

The specific Galaxy A8 2018 SM-A530F U16 Firmware Download Package comes with a Stock ROM of Galaxy A8 2018 SM-A530F U16 Security Patch Level 2021-01-01 (1 January 2021). This helps bypass FRP lock and revert from the root and custom ROM.

Samsung Galaxy A8 2018 SM-A530F Binary 16 Android 9 Pie Brazil ZTO – A530FXXSGCUA3

There are various reasons to flash “Stock Firmware on Galaxy A8 2018 SM-A530F U16“. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to reset your phone hard and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty.


Galaxy A8 2018 SM-A530F U16 Stock ROM Details:

SM-A530F U16 Brazil ZTO – A530FXXSGCUA3:

Model SM-A530F Binary 16 U16, S16, Bit 16
Region / Country Brazil
Language Multi-Language
Android version Android 9 Pie
Operator Clean ZTO (without logo, operator apps)
Product code ZTO
Build Date Tue, 05 Jan 2021
Security Patch Level 2021-01-01 (1 January 2021)
Size 3.4 GB
Downloads Google Drive Android File Host

Download Galaxy A8 2018 SM-A530F U16 Boot.img

boot.img.lz4 A8 2018 SM-A530F A530FXXSGCUA3 to root on Magisk without TWRP

Download Google Drive

How To Install Galaxy A8 2018 SM-A530F U16 Stock Firmware:

Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, Skip this Step.

2: Download and extract the [highlight color=”yellow”]Galaxy A8 2018 SM-A530F U16 Firmware[/highlight] files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you must boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will be able to see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then, connect your Smartphone to the computer.

7: Once you have connected the smartphone to the computer, Odin will automatically recognize the device and show the “Added” message in the lower left panel.

8: Once Odin detects your device, click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once the Firmware process is completed, you will be able to see a Green Box with a Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see the Pass message in Odin, you can disconnect your Device from the computer.

The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot but don’t be alarmed.

When your Galaxy A8 2018 SM-A530F U16 finally boots up, you should run your desired firmware.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”


  • Please read and understand the Full Guide before flashing “Galaxy A8 2018 SM-A530F U16 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

Related Articles

Back to top button