Galaxy A8 2018 SM-A530F Binary 15 Firmware

The specific Galaxy A8 2018 SM-A530F U15 Firmware Download Package comes with a Stock ROM of Galaxy A8 2018 SM-A530F U15 Security Patch Level 2020-11-01 (1 November 2020). This helps you to bypass the FRP lock and revert from the root and custom ROM.

Advertisement

Samsung Galaxy A8 2018 SM-A530F U15 Firmware

There are various reasons to flash “Stock Firmware on Galaxy A8 2018 SM-A530F U15“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy A8 2018 SM-A530F U15 Stock ROM Details:

Model SM-A530F Binary 15 U15, S15, Bit 15
Region / Country Brazil
Language Multi-Language
Android version Android 9 Pie
Operator Clean ZTO (without logo, operator apps)
PDA A530FXXSFCTK3
CSC A530FOXMFCTK3
Product code ZTO
Build Date Wed, 04 Nov 2020
Security Patch Level 2020-11-01 (1 November 2020)
Size 3.4 GB
[quads id=2]
Download Google Drive Android File Host

Download Optional Boot.img

boot.img Galaxy A8 2018 SM-A530F A530FXXSFCTK3 to root on Magisk without TWRP

Download Google Drive

How To Install Galaxy A8 2018 SM-A530F U15 Stock Firmware:

1: Download and Install the Samsung USB Driver on your computer.

2: Download and extract the Galaxy A8 2018 SM-A530F U15 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you can see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

6: Open Odin. Then, connect your phone to the pc.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Once Odin detects your device, click the PDA button, and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot, but don’t be alarmed.

When your Galaxy A8 2018 SM-A530F finally boots up, you should now be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy A8 2018 SM-A530F U15 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from using information in this guide.
  • Phone must have a 70–80% charge.