Galaxy A72 SM-A725M Binary 2 Firmwar

The specific Galaxy A72 SM-A725M U2 Firmware Download Package comes with a Stock ROM of Galaxy A72 SM-A725M U2 Security Patch Level 2021-06-01 (June 1, 2021). This helps you to bypass FRP lock and revert from the root and custom ROM.

Samsung Galaxy A72 SM-A725M Binary 2 Android 11 R ZTO – TCE – A725MUBU2AUF3 – A325MUBU2AUK1

There are various reasons to flash “Stock Firmware on Galaxy A72 SM-A725M U2 “. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to hard reset your phone and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Galaxy A72 SM-A725M U2 Stock ROM:

  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty.

Pre-requirements:

Galaxy A72 SM-A725M U2 Stock ROM Details:

Samsung Galaxy A72 SM-A725M Binary 2 Android 11 R ZTO – A725MUBU2AUF3

ModelSM-A725M Binary 2 U2, S2, Bit 2
Region / CountryBrazil
LanguageMulti-Language
Android versionAndroid 11 R
Operator / CarrierClean ZTO (no logo, carrier apps)
PDAA725MUBU2AUF3
CSCA725MOWO2AUF3
product codeZTO
Build DateThu, 24 Jun 2021
Security Patch Level2021-06-01 (June 1, 2021)
Size5.6 GB
Advertisment
DownloadGoogle DriveAndroid File Host

Samsung Galaxy A72 SM-A725M Binary 2 Android 11 R – TCE – Mexico – A325MUBU2AUK1

ModelSM-A725M Binary 2 U2, S2, Bit 2
Region / CountryMexico
LanguageMulti-Language
Android versionAndroid 11 R
Operator / CarrierClean (no logo, carrier apps)
PDAA325MUBU2AUK1
CSCA325MOWA2AUJ4
product codeTCE
Build Date2021-11-10
Security Patch Level
Size5.2 GB
DownloadGoogle DriveAndroid File Host

How To Install Galaxy A72 SM-A725M U2 Stock Firmware:

Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the Galaxy A72 SM-A725M U2 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you need to boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will be able to see a Warning Yellow Triangle Sign. In this situation, you have to press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.

8: Once Odin detects your device, click on the PDA button, and select the Firmware.tar file.

9: Now, click on the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once the Firmware process is completed, you will see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see, the Pass message in Odin, you can disconnect your Device from the computer.

The flashing process will begin and should take about 10–12 minutes. It may take some time for your device to reboot, but don’t be alarmed.

When your Galaxy A72 SM-A725M U2 finally boots up, you should now be running your desired firmware.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”

Disclaimer:

  • Please read and understand the Full Guide before flashing “Galaxy A72 SM-A725M U2 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.
Leave a Reply

Your email address will not be published. Required fields are marked *

You May Also Like

Samsung Galaxy Note 3 N900V Root With Towel Root

[Guide] How to root Samsung Galaxy Note 3 Verizon N900V Table of Contents [Guide]…

Galaxy A20 SM-A205GN Binary 7 Firmware – A205GNDXS7BTI2

The specific Galaxy A20 SM-A205GN U7 Firmware Download Package comes with a Stock…

Samsung Galaxy A50s Combination File

An Galaxy A50s Combination File is a test mode that does not…

Galaxy Tab A7 Lite SM-T227U Binary 1 Firmware [Full Repair]

The specific Galaxy Tab A7 Lite SM-T227U U1 Firmware Download Package comes with…