Galaxy A72 SM-A725F Binary 4 Firmware

The specific Galaxy A72 SM-A725F U4 Firmware Download Package has a Stock ROM of Galaxy A72 SM-A725F U4 Security Patch Level 2022-02-01 (February 2022). This helps bypass the FRP lock and revert from the root and custom ROM.

Advertisement

Samsung Galaxy A72 SM-A725F Binary 4 Firmware – Android 12 S – XID – A725FXXU4BVB4 – Indonesia

There are various reasons to flash “Stock Firmware on Galaxy A72 SM-A725F U4“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

Suppose you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy A72 SM-A725F U4 Stock ROM Details:

SM-A725F U4 Firmware – XID – A725FXXU4BVB4 – Indonesia:

Model SM-A725F Binary 4 U4, S4, Bit 4
Region / Country Indonesia
Language Multi-Language
Android version Android 12 S
Operator / Carrier clear
PDA A725FXXU4BVB4
CSC A725FOLE4BVB2
MODEM CP Version A725FOLE4BVB2
product code XID
Build Date 20220303210050
Security Patch Level 2022-02-01 (February 2022)
Size  GB Full Files
[quads id=2]
Download Google Drive Android File Host

How To Install Galaxy A72 SM-A725F U4 Stock Firmware:

1: Install the Samsung USB Driver on your pc.

2: Download and extract the  Galaxy A72 SM-A725F U4 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Open Odin. Then, connect your phone to the pc.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the Device and show the “Added” message at the lower-left panel.

8: Once Odin detects your Device, click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed, you can see a Green Box with Pass written in Odin. During this process, the Smartphone will reboot automatically.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
The flashing process will begin and should take about 10–12 minutes. Your Device may take some time to reboot but don’t be alarmed.

You should run your desired firmware when your Galaxy A72 SM-A725F U4 finally boots up.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy A72 SM-A725F U4 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your Device resulting from using the information in this guide.
  • Phone must have a 70–80% charge.