The specific Galaxy A71 5G SM-A716U Firmware Download Package comes with a Stock ROM of Galaxy A71 5G SM-A716U Creation Date 2021-07-22. This helps bypass FRP lock and revert from the root and custom ROM.
Samsung Galaxy A71 5G SM-A716U Firmware – A716USQU5DUG1 – Android 11 – SPR – United States
There are various reasons to flash “Stock Firmware on Galaxy A71 5G SM-A716U“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy A71 5G SM-A716U
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy A71 5G SM-A716U Stock ROM Details:
SM-A716U Firmware – A716USQU5DUG1 – Android 11 – SPR – United States:
| PDA / AP Version: | A716USQU5DUG1 |
| CSC version: | A716UOYN5DUG1 |
| MODEM / CP Version: | A716USQU5DUG1 |
| Region: | SPR – United States |
| Creation Date: | 2021-07-22 |
| Change list 2: | 2171684 |
| Android: | Android 11 R |
| Model: | Samsung Galaxy A71 5G SM-A716U |
| Download | SPR-A716USQU5DUG1-20210820101125.zip |
How To Install Galaxy A71 5G SM-A716U Stock Firmware:
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy A71 5G SM-A716U Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once the Firmware process is completed, you can see a Green Box with a Pass written on it in Odin. During this process, the Smartphone will reboot automatically.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot, but don’t be alarmed.
When your Galaxy A71 5G SM-A716U finally boots up, you should be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A71 5G SM-A716U Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.