Galaxy A7 2018 SM-A750FN Firmware – Full Repair

Galaxy A7 2018 SM-A750FN

The specific Galaxy A7 2018 SM-A750FN Firmware Download Package comes with a Stock ROM of Galaxy A7 2018 SM-A750FN. This helps you to bypass FRP lock and revert from the root and custom ROM.

Samsung Galaxy A7 2018 SM-A750FN Firmware

There are various reasons to flash “Stock Firmware on Galaxy A7 2018 SM-A750FN“. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to hard reset your phone and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Galaxy A7 2018 SM-A750FN Stock ROM:

  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Pre-requirements:

Galaxy A7 2018 SM-A750FN Stock ROM Details:

ROM FULL A750FN DOWNLOAD
AP VERSION CSC VERSION code Type OS Size google link
A750FNPUU 4 CTC4 A750FNSER4CTC4 SER FULL ten 3.0G DOWNLOAD
A750FNPUS 4 BTB2 A750FNSER4BTB2 SER FULL OS9 2.8G DOWNLOAD
A750FNXXS 4 BTA6 A750FNOXM4BTA6 BTU FULL OS9 3.3G DOWNLOAD
A750FNXXU 3 BSL1 A750FNPRT3BSKB PRT FULL OS9 3.1G DOWNLOAD
A750FNPUS 3 BSKA A750FNSER3BSKA SER FULL OS9 2.8G DOWNLOAD
A750FNXXS 3 BSK8 A750FNOGC3BSK8 ORS FULL OS9 2.8G DOWNLOAD
A750FNXXS 2 BSH7 A750FNODX2BSH7 DNL FULL OS9 3.0G DOWNLOAD
A750FNPUU 2 BSH6 A750FNSER2BSH6 SER FULL OS9 2.8G DOWNLOAD
A750FNXXU 2 BSH2 A750FNOXM2BSH2 LUX FULL OS9 3.3G DOWNLOAD
A750FNXXU 1 BSG2 A750FNMSR1BSG2 MSR FULL OS9 2.8G DOWNLOAD
A750FNXXS 1 BSF5 A750FNOGC1BSE1 FTM FULL OS9 2.8G DOWNLOAD
A750FNPUU 1 BSC4 A750FNSER1BSC4 SER FULL OS9 2.8G DOWNLOAD
A750FNPUU 1 ASB2 A750FNSER1ASB2 SER FULL 8.0 2.7G DOWNLOAD
A750FNXXU 1 ARIC A750FNMET1ARIC MET FULL 8.0 2.6G DOWNLOAD

How To Install Galaxy A7 2018 SM-A750FN Stock Firmware:

Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the Galaxy A7 2018 SM-A750FN Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you need to boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will be able to see a Warning Yellow Triangle Sign. In this situation, you have to press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.

8: Once Odin detects your device, click on the PDA button, and select the Firmware.tar file.

9: Now, click on the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

The once Firmware process is completed you will be able to see a Green Box with a Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see, the Pass message in Odin, you can disconnect your Device from the computer.

The flashing process will begin and should take about 10–12 minutes. It may take some time for your device to reboot, but don’t be alarmed.

When your Galaxy A7 2018 SM-A750FN finally boots up, you should now be running your desired firmware.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”

Disclaimer:

  • Please read and understand the Full Guide before flashing “Galaxy A7 2018 SM-A750FN Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.
Leave A Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More