Galaxy A6 + SM-A605G U7 Firmware File – A605GDXS7CTF1
The specific Galaxy A6 + SM-A605G U7 Firmware Download Package has a Stock ROM of Galaxy A6 + SM-A605G U7 Security Patch Level 2020-06-01 (1 June 2020). This helps bypass the FRP lock and revert from the root and custom ROM.
Galaxy A6 Plus SM-A605G Binary 7 Android 10 Q XXV – Vietnam A605GDXS7CTF1
There are various reasons to flash “Stock Firmware on Galaxy A6 + SM-A605G U7“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy A6 + SM-A605G U7
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy A6 + SM-A605G U7 Stock ROM Details:
| Model | SM-A605G Binary 7 U7, S7, Bit 7 |
| Region / Country | Vietnam |
| Language | Multi-Language |
| Android version | Android 10 Q |
| Operator | Clean XXV (without logo, operator apps) |
| PDA | A605GDXS7CTF1 |
| CSC | A605GOLM7CTF1 |
| Product code | XXV |
| Build Date | Sat, 06 Jun 2020 |
| Security Patch Level | 2020-06-01 (1 June 2020) |
| Size | 3.2 GB |
| Download | 4File | Google Drive | Android File Host |
How To Install Galaxy A6 + SM-A605G U7 Stock Firmware:
How To Flash Samsung Stock Firmware With ODIN
1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, then Skip this Step.
2: Download and extract the Galaxy A6 + SM-A605G U7 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot, but don’t be alarmed.
When your Galaxy A6 + SM-A605G finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A6 + SM-A605G U7 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from using information in this guide.
- Phone must have a 70–80% charge.
