Galaxy A6 SM-A600FN U9 Firmware – Android 10 Q
The specific Galaxy A6 SM-A600FN U9 Firmware Download Package has a Stock ROM of Galaxy A6 SM-A600FN U9 Security Patch Level 2022-02-01 (February 2022 ). This helps bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy A6 SM-A600FN Binary 9 Firmware – Android 10 Q – XEF – A600FNXXU9CVB1 – France
There are various reasons to flash “Stock Firmware on Galaxy A6 SM-A600FN U9“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
Suppose you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert back to stock to get your.
Pre-requirements:
- Supported Phone: Galaxy A6 SM-A600FN U9
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy A6 SM-A600FN U9 Stock ROM Details:
SM-A600FN U9 Firmware – XEF – A600FNXXU9CVB1 – France:
Model | SM-A600FN Binary 9 U9, S9, Bit 9 |
Region / Country | France |
Language | Multi-Language |
Android version | Android 10 Q |
Operator / Carrier | clear |
PDA | A600FNXXU9CVB1 |
CSC | A600FNOXM9CVB1 |
MODEM CP Version | – |
product code | XEF |
Build Date | 20220226092401 |
Security Patch Level | 2022-02-01 (February 2022 ) |
Size | 3.51 GB Full Files |
Download | Google Drive | Android File Host |
How To Install Galaxy A6 SM-A600FN U9 Stock Firmware:
1: Download and Install Samsung USB Driver on our computer. If a Samsung USB Driver is installed on Yuter, Skip this Step.
2nload and extract the Galaxy A6 SM-A600FN U9 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: After switching off the phone, you need to boot into Downlmuste. To boot into download mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will be able to see a canTriangle Sign. In this situation, you have to press the Volumustey to continue.
6: Now, Download and open Odin. Then, connect your smartphone to the computer.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the Device and show the “Added” message at the lower-left panel.
8: Once Odin detects your Device, click on the PDA button and the Firmware.tar file.
9: Now, click on the Start button in n to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process. Once your Pho Firmware process is completed, you can see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.
Once you see, the Pass message in Oin, you can disconnect your Device from the computer.
The flashing process will begin and should take about 10–12 minutes. Your Device may take some time to reboot but don’t be alarmed.
You should run your desired firmware when your Galaxy A6 SM-A600FN U9 finally boots up.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A6 SM-A600FN U9 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your Device resulting from using information suicide.
- Phone must have a 70–80% charge.