The specific Galaxy A52 5G SM-A526U U4 Firmware Download Package comes with a Stock ROM of Galaxy A52 5G SM-A526U U4 Security Patch Level 2022-02-01 (February 2022). This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy A52 5G SM-A526U Binary 4 Android 11 R United States TMB A526USQS4AUL1
There are various reasons to flash “Stock Firmware on Galaxy A52 5G SM-A526U U4“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy A52 5G SM-A526U U4
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin Latest version
Galaxy A52 5G SM-A526U U4 Stock ROM Details:
SM-A526U U4 United States TMB A526USQS4AUL1:
Model | SM-A526U Binary 4, U4, S4, Bit 4 |
Region / Country | United States |
Language | Multi-Language |
Android version | Android 11 R |
Operator / Carrier | Clean |
PDA | A526USQS4AUL1 |
CSC | A526UOYN4AUL1 |
MODEM CP Version | – |
product code | TMB |
Build Date | 20211213194530 |
Security Patch Level | 2021-12-01 (December 2021) |
Size | 4 GB |
Download | YD File | Android File Host |
How To Install Galaxy A52 5G SM-A526U U4 Stock Firmware:
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy A52 5G SM-A526U U4 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy A52 5G SM-A526U U4 finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A52 5G SM-A526U U4 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.