Home Stock Firmware Samsung Galaxy A50 SM-A505U1 U17 Firmware -Android 11 R

Galaxy A50 SM-A505U1 U17 Firmware -Android 11 R

SM-A505U1 Binary 17 Firmware

The specific Galaxy A50 SM-A505U1 U17 Firmware Download Package has a Stock ROM of Galaxy A50 SM-A505U1 U17. This helps bypass FRP lock and revert from the root and custom ROM.

Samsung Galaxy A50 SM-A505U1 Binary 17 Firmware -Android 11 R – XAR – A505U1UESHDVB1- United States

There are various reasons to flash “Stock Firmware on Galaxy A50 SM-A505U1 U17“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

Suppose you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy A50 SM-A505U1 U17 Stock ROM Details:

SM-A505U1 U17 Firmware -XAR – A505U1UESHDVB1- United States:

Model SM-A505U1 Binary 7 U7, S7, Bit 7
Region / Country United States
Language Multi-Language
Android version Android 11 R
Operator / Carrier Clean (no logo, carrier apps)
PDA A505U1UESHDVB1
CSC A505U1OYMHDVB1
MODEM CP Version
product code XAR
Build Date 20220221214110
Security Patch Level
Size  4.01 GB  Full Files
[quads id=2]
Download Google Drive Android File Host

How To Install Galaxy A50 SM-A505U1 U17 Stock Firmware:

1: Install the Samsung USB Driver on your pc.

2: Download and extract the  Galaxy A50 SM-A505U1 U17 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Open Odin. Then, connect your phone to the pc.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

You should run your desired firmware when your Galaxy A50 SM-A505U1 U17 finally boots up.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy A50 SM-A505U1 U17 Firmware.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.

Exit mobile version