Galaxy A50 SM-A505U U18 Firmware – Android 11 R

SM-A505U Binary 18 Firmware

The specific Galaxy A50 SM-A505U U18 Firmware Download Package has a Stock ROM of Galaxy A50 SM-A505U U18 Security Patch Level 2022-03-01 (March 2020). This helps bypass the FRP lock and revert from the root and custom ROM.

Samsung Galaxy A50 SM-A505U Binary 18 Firmware – Android 11 R – SPR – A505USQSIDVB1 – United States

There are various reasons to flash “Stock Firmware on Galaxy A50 SM-A505U U18“. For example, your Phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

Suppose you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the Phone
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy A50 SM-A505U U18 Stock ROM Details:

SM-A505U U18 Firmware –  SPR – A505USQSIDVB1 – United States:

Model SM-A505U Binary 18 U18, S18, Bit 18
Region / Country United States
Language Multi-Language
Android version Android 11 R
Operator / Carrier Clean (no logo, operator apps)
AP / PDA A505USQSIDVB1
CSC A505UOYNIDVB1
MODEM CP Version
product code SPR
Build Date 20220313074640
Security Patch Level 2022-03-01 (March 2020)
Size 4.31 GB Full Files
[quads id=2]
Download Google Drive Android File Host

How To Install Galaxy A50 SM-A505U U18 Stock Firmware:

1: Install the Samsung USB Driver on your pc.

2: Download and extract the  Galaxy A50 SM-A505U U18 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Open Odin. Then, connect your phone to the pc.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your PPhone

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your Galaxy A50 SM-A505U U18 finally boots up, you should now run your desired firmware.

Head to Settings –> About PPhone–> Software Information to check that the correct firmware is installed. The firmware number is located under the “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy A50 SM-A505U U18 Firmware.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.