The specific Galaxy A50 SM-A505N U6 Firmware Download Package has a Stock ROM of Galaxy A50 SM-A505N U6 Security Patch Level 2022-02-01 (February 1, 2022). This helps bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy A50 SM-A505N Binary 6 Firmware – Android 11 R – SKC – A505NKSU6DVB1 – South Korea
There are various reasons to flash “Stock Firmware on Galaxy A50 SM-A505N U6“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Galaxy A50 SM-A505N U6 Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy A50 SM-A505N U6
- Charge your mobile: You may no less than a half charge.
- Laptop or PC: charge. To execute this installation, you must use a PC or Laptop.
- Backup Android Phone
- Download and install Samsung USB Driver
- Download Odin’s Latest version
Galaxy A50 SM-A505N U6 Stock ROM Details:
Model | SM-A505N Binary 6 U6, S6, Bit 6 |
Region / Country | South Korea |
Language | Multi-Language |
Android version | Android 11 R |
Operator / Carrier | Clean (no logo, carrier apps) |
PDA | A505NKSU6DVB1 |
CSC | A505NOKR6DVB1 |
MODEM CP Version | South Korea |
product code | SKC |
Build Date | 20220224012630 |
Security Patch Level | 2022-02-01 (February 1, 2022) |
Size | 4.56 GB Full Files |
Download | Google Drive | Android File Host |
How To Install Galaxy A50 SM-A505N U6 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.
2: Download and extract the Galaxy A50 SM-A505N U6 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: After switching off the phone, you need to boot into Download Mode. To boot, imustnload mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will be able to see a Warning Yellow Triangle Sign. In this situation, you have to press the Volume Up key to continumustow, Download and open Odin. Then connect your Smartphone to the computer.
,7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the Device and show the “Added” message at the lower-left panel.
8: Once Odin detects your Device, click on the PDA button, and select the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
The flashing process will begin and should take about 10–12 minutes. Your Device may take some time to reboot but don’t be alarmed.
You should run your desired firmware when your Galaxy A50 SM-A505N U6 finally boots up.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A50 SM-A505N U6 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from using Deviceormation in this guide.
- Phone must have a 70–80% charge.