Galaxy A50 SM-A505GT U8 Firmware – A505GTUBS8CUE5
Samsung is simultaneously updating its Galaxy A50 SM-A505GT U8 Android 11 firmware update with Security Patch Level 2021-06-01 (June 1, 2021). Of course, the device receives many new features; in addition to all the new features of One UI 3.1, we have better performance, the applications stay in RAM and run faster, and the performance is also improved since the background apps have more limits and only work when needed.
Samsung Galaxy A50 SM-A505GT Binary 8 Android 11 R Brazil ZTO – A505GTUBS8CUE5
There are various reasons to flash “Stock Firmware on Galaxy A50 SM-A505GT U8“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-prerequisites:
- Supported Phone: Galaxy A50 SM-A505GT U8
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy A50 SM-A505GT U8 Stock ROM Details:
SM-A505GT U8 Brazil ZTO – A505GTUBS8CUE5:
Model | SM-A505GT Binary 8 U8, S8, Bit 8 |
Region / Country | Brazil |
Language | Multi-Language |
Android version | Android 11 R |
Operator / Carrier | Clean ZTO (without logo, operator apps) |
PDA | A505GTUBS8CUE5 |
CSC | A505GTOWO8CUE5 |
Product code | ZTO |
Build Date | 18 May 2021 |
Security Patch Level | 2021-05-01 (May 1, 2021) |
Size | 4.1 GB |
Download | Google Drive | Android File Host |
How To Install Galaxy A50 SM-A505GT U8 Stock Firmware:
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy A50 SM-A505GT U8 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once the Firmware process is completed, you will see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy A50 SM-A505GT finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A50 SM-A505GT U8 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.