Galaxy A50 SM-A505G U5 Firmware – A505GUBS5BTG1
The specific Galaxy A50 SM-A505G U5 Firmware Download Package has a Stock ROM of Galaxy A50 SM-A505G U5 Security Patch Level 2020-07-01 (1 July 2020). This helps bypass FRP lock and revert from the root and custom ROM.
Samsung Galaxy A50 SM-A505G U5 – A505GUBS5BTG1
There are various reasons to flash “Stock Firmware on Galaxy A50 SM-A505G U5“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy A50 SM-A505G U5
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy A50 SM-A505G U5 Stock ROM Details:
Model: | SM-A505G Binary 5 U5, S5, Bit 5 |
Region / Country: | Peru |
Language: | Multi-Language |
Android version: | Android 10 Q |
Operator: | Clean PET (without logo, operator apps) |
PDA: | A505GUBS5BTG1 |
CSC: | A505GOWA5BTC4 |
Product code: | PET |
Build Date: | 07 Jul 2020 |
Security Patch Level: | 2020-07-01 (1 July 2020) |
Size: | 4 GB |
Download | 4File | Google Drive | Android File Host |
How To Install Galaxy A50 SM-A505G U5 Stock Firmware:
Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.
How To Flash Samsung Stock Firmware With ODIN
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy A50 SM-A505G U5 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy A50 SM-A505G U5 finally boots up, you should now run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A50 SM-A505G U5 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.