Galaxy A50 SM-A505FN U9 Firmware – Android 11 R
The specific Galaxy A50 SM-A505FN U9 Firmware Download Package comes with a Stock ROM of Galaxy A50 SM-A505FN U9 Security Patch Level 2023-02-01 (2023-02-01 (February 1, 2023)1, 2023). This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy A50 SM-A505FN Binary 9 Android 11 Portugal MEO A505FNXXU9CWB4
There are various reasons to flash “Stock Firmware on Galaxy A50 SM-A505FN U9“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy A50 SM-A505FN U9
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy A50 SM-A505FN U9 Stock ROM Details:
SM-A505FN U9 Portugal MEO A505FNXXU9CWB4:
Model | SM-A505FN Binary 9 U9, S9, Bit 9 |
Region / Country | Portugal |
Language | Multi-Language |
Android version | Android 11 R |
Operator / Carrier | Clean MEO (no logo, carrier apps) |
AP / PDA | A505FNXXU9CWB4 |
CSC | A505FNOXJ9CWB4 |
Modem CP Version / Baseband | A505FXXU9CWB1 |
product code | MEO |
Build Date | 2023-02-28 |
Security Patch Level | 2023-02-01 (February 1, 2023) |
Size | 4.3 GB |
Download | Mega | Google Drive |
How To Install Galaxy A50 SM-A505FN U9 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, then Skip this Step.
2: Download and extract the Galaxy A50 SM-A505FN U9 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
You should run your desired firmware when your Galaxy A50 SM-A505FN U9 finally boots up.
If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A50 SM-A505FN U9 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.
- 7 Tips to increase Samsung Galaxy battery life
- Remove the black bar from the Samsung keyboard
- Disable the camera geotag on Samsung phones
- Steps To Record The Samsung Galaxy Screen
- Fix Moisture Detected on Samsung
- Download USB Drivers for Samsung Mobiles
- KnoxPatch: LSPosed Module to Restore Samsung Knox Features