The specific Galaxy A42 5G SM-A426B U3 Firmware Download Package has a Stock ROM of Galaxy A42 5G SM-A426B U3 Security Patch Level 2022-01-01 (January 1, 2022). This helps bypass FRP lock and revert from the root and custom ROM.
Samsung Galaxy A42 5G SM-A426B Binary 3 Android 12 Portugal MEO A426BXXU3CVA9
There are various reasons to flash “Stock Firmware on Galaxy A42 5G SM-A426B U3“. For example, your Phone will be stuck or hang on the logo. You want to remove the FRP lock from it.
Suppose you’re going to reset your Phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs on the Phone
- To solve the lag or stutter
- Fix software issues.
- Revert back to stock to get your entry.
Pre-requirements:
- Supported Phone: Galaxy A42 5G SM-A426B U3
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install Samsung USB Driver
- Download the d Odin’s Latest version
Galaxy A42 5G SM-A426B U3 Stock ROM Details:
SM-A426B U3 Portugal MEO A426BXXU3CVA9:
| Model | SM-A426B Binary 3 U3, S3, Bit 3 |
| Region / Country | Portugal |
| Language | Multi-Language |
| Android version | Android 12 s |
| Operator / Carrier | Clean MEO (no logo, operator apps) |
| PDA | A426BXXU3CVA9 |
| CSC | A426BOXM3CVA9 |
| MODEM CP Version | A426BXXU3CVA9 |
| product code | MEO |
| Build Date | 2022-01-22 |
| Security Patch Level | 2022-01-01 (January 1, 2022) |
| Size | 5.9 GB |
| Download | Google Drive | Android File Host |
How To Install Galaxy A42 5G SM-A426B U3 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is already installed on your, then Skip this Step.
2: Dod and extract the Galaxy A42 5G SM-A426B U3 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: After switching off the Phone, you need to boot into DownloadmustTo boot into download mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the Device and show the “Added” message at the lower-left panel.
8: Once Odin detects your Device, click on the PDA button and sell the Firmware.tar file.
9: Now, click the Start button in Odio to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once the Firmware process is completed, you can see a Green Bcanitten on it in Odin. During this process, the Smartphone will reboot automatically.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
The flashing process will begin and should take about 10–12 minutes. It may take some time for Your device Device to reboot, armed.
When your Galaxy A42 5G SM-A426B U3 finally boots up, you should now be running your desired fare.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A42 5G SM-A426B U3 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your Device resulting from the use of information.
- Phone must have a 70–80% charge.
