Galaxy A33 5G SM-A336M U1 Firmware – Android 12 S

SM-A336M Binary 1 Firmware

The specific Galaxy A33 5G SM-A336M U1 Firmware Download Package has a Stock ROM of Galaxy A33 5G SM-A336M U1 Security Patch Leve 2022-03-01 (March 1, 2022). This helps bypass the FRP lock and revert from the root and custom ROM.

Samsung Galaxy A33 5G SM-A336M Binary 1 Android 12 Brazil ZTO A336MUBU1AVC9

There are various reasons to flash “Stock Firmware on Galaxy A33 5G SM-A336M U1“. For example, your Phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

Suppose you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the Phone
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy A33 5G SM-A336M U1 Stock ROM Details:

SM-A336M U1 Brazil ZTO A336MUBU1AVC9:

Model SM-A336M Binary 1 U1, S1, Bit 1
Region / Country Brazil
Language Multi-Language
Android version Android 12 S
Operator / Carrier Clean ZTO (no logo, carrier apps)
AP / PDA A336MUBU1AVC9
CSC A336MOWO1AVC9
MODEM CP Version A336MUBU1AVC9
product code ZTO
Build Date 2022-03-15
Security Patch Level 2022-03-01 (March 1, 2022)
Size 5.9 GB
[quads id=2]
Download Google Drive Android File Host

How To Install Galaxy A33 5G SM-A336M U1 Stock Firmware:

1: Install the Samsung USB Driver on your pc.

2: Download and extract the  Galaxy A33 5G SM-A336M U1 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the Phone, you need to boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Open Odin. Then, connect your phone to the pc.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed, you can see a Green Box with Pass written in Odin. During this process, the Smartphone will reboot automatically.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your Galaxy A33 5G SM-A336M U1 finally boots up, you should run your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy A33 5G SM-A336M U1 Firmware.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.