Galaxy A32 5G SM-A326B/DS U8 Firmware – Android 13 T

by

Galaxy A32 5G SM-A326B/DS U8 Firmware
If you own a Galaxy A32 5G SM-A326B/DS smartphone and want to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy A32 5G SM-A326B/DS U8 With 2023-10-01 (October 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.

Samsung Galaxy A32 5G SM-A326B/DS Binary 8 Android 13 Brazil ZTO A326BXXU8CWJ2

Benefits of Updating Firmware

There are various reasons to flash “Stock Firmware on Galaxy A32 5G SM-A326B/DS U8“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Preparation:

How To Install Galaxy A32 5G SM-A326B/DS U8 Stock Firmware:

Download Galaxy A32 5G SM-A326B/DS U8 Latest Firmware:

SM-A326B/DS U8 Brazil ZTO A326BXXU8CWJ2:

Model SM-A326B Binary 8 U8, S8, Bit 8
Region / Country Brazil
Language Multi-Language
Android Version Android 13 T
Operator / Carrier Clean ZTO (without logo, operator apps)
AP/PDA A326BXXU8CWJ2
CSC A326BOWO8CWJ2
Modem CP Version / Baseband A326BXXU8CWJ2
Product code ZTO
Model References SM-A326BLVRZTO, SM-A326BZKRZTO, SM-A326BLVKZTO, SM-A326BZKKZTO
Build / Release Date 2023-10-25
Security Patch Level 2023-10-01 (October 1, 2023)
Size 4.8GB
[quads id=2]
Brazil ZTO Google Drive
Brazil Vivo ZVV Google Drive

1: Install the Samsung USB Driver on your pc.

2: Download and extract the  Galaxy A32 5G SM-A326B/DS U8 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

6: Open Odin. Then, connect your phone to the pc.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot, but don’t be alarmed.

When your Galaxy A32 5G SM-A326B/DS U8 finally boots up, you should run your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Troubleshooting

If you encounter any problems during the firmware update process, here are a few things you can try:

  1. Restart your device and retry the installation process.
  2. Ensure your device has sufficient battery.
  3. If you continue encountering problems, you may need to perform a factory reset on your device. This will erase all of your data, so be sure to back up your data before performing a factory reset.

Conclusion

Installing the latest firmware on your Galaxy A32 5G SM-A326B/DS U8 can improve your device, including bug fixes and new features. If you follow the steps outlined in this guide, you can update your device to the latest firmware version successfully. If you encounter any problems during the installation process, refer to the troubleshooting section of this guide for help.

Must Read:

Leave a Comment