Galaxy A32 5G SM-A326B/DS Binary 10 Firmware
SM-A326B/DS Binary 10 Android 13 Brazil ZTO A326BXXSACXC5
Model / Device | SM-A326B/DS Binary 10 U10, S10, Bit 10 |
Region / Country | Brazil |
Language | Multi-Language |
Android Version | Android 13 T |
Operator / Carrier | Clean ZTO (without logo, operator apps) |
AP/PDA | A326BXXSACXC5 |
CSC | A326BOWOACXC5 |
Modem CP Version / Baseband | A326BXXSACWC5 |
Product code | ZTO |
Model References | SM-A326BLVRZTO, SM-A326BZKRZTO, SM-A326BLVKZTO, SM-A326BZKKZTO |
Build / Release Date | 2024-03-11 |
Security Patch Level | 2024-02-01 (February 1, 2024) |
Size | 4.8GB |
Download | Google Drive |
Downgrade Binaries For A32 5G SM-A326B/DS
- Galaxy A32 5G SM-A326B/DS U4 Firmware
- Galaxy A32 5G SM-A326B/DS U5 Firmware
- Galaxy A32 5G SM-A326B/DS U6 Firmware
- Galaxy A32 5G SM-A326B/DS U7 Firmware
- Galaxy A32 5G SM-A326B/DS U8 Firmware
- Galaxy A32 5G SM-A326B/DS U9 Firmware
The Galaxy A32 5G SM-A326B/DS U10 Firmware Download Package comes with a Security Patch Level from February 1, 2024. This helps bypass the FRP lock and go back from root access and custom ROM.
Pre-requirements:
- Supported Phone: Galaxy A32 5G SM-A326B/DS U10
- Charge your mobile: You may no less than a half charge.
- Laptop or PC: To execute this installation, you must use a PC or Laptop.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
How To Install Stock Firmware:
1: Get the Samsung USB Driver on your computer.
2: Grab and unzip the Galaxy A32 5G SM-A326B/DS U10 Firmware files on your PC.
3: Power down your Smartphone.
4: Turn off the phone, then boot into Download Mode.
Hold the Volume Down, Home, and Power buttons together for 5-8 seconds until Download mode kicks in.
5: In Download mode, you’ll see a Warning Yellow Triangle Sign. Press Volume Up to proceed.
6: Download and launch Odin. Connect your Smartphone to the computer.
7: Once connected, Odin will say “Added” in the lower-left panel.
8: Once the device is spotted, choose the Firmware.tar file by hitting the PDA button in Odin.
9: Hit Start in Odin to start the Flashing process.
10: Flashing usually takes 30-50 seconds on your Phone.
After the Firmware process is completed, a Green Box with a Pass will pop up in Odin. The Smartphone will reboot on its own.
To check the installed firmware, head to Settings > About Phone > Software Information. Look for the firmware number under “Baseband version.”