Galaxy A31 SM-A315G/DS U1 Firmware – Android 12 S

SM-A315G/DS Binary 1 Firmware - Android 12 S

The specific Galaxy A31 SM-A315G/DS U1 Firmware Download Package comes with a Stock ROM of Galaxy A31 SM-A315G/DS U1 Security Patch Level 2022-10-01 (October 1, 2022). This helps you to bypass the FRP lock and revert from the root and custom ROM.

Samsung Galaxy A31 SM-A315G/DS Binary 1 Android 12 Brazil ZTO A315GDXU1DVJ2

There are various reasons to flash “Stock Firmware on Galaxy A31 SM-A315G/DS U1“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Return to stock for warranty coverage.

Pre-requirements:

Galaxy A31 SM-A315G/DS U1 Stock ROM Details:

SM-A315G/DS U1 Brazil ZTO A315GDXU1DVJ2:

Model SM-A315G/DS Binary 1 U1, S1, Bit 1
Region / Country Brazil
Language Multi-Language
Android version Android 12 s
Operator / Carrier Clean ZTO (no logo, carrier apps)
AP / PDA A315GDXU1DVJ2
CSC A315GOWO1DVJ2
CP Version / Baseband Modem A315GDXU1DVH1
product code ZTO
Build Date 2022-10-13
Security Patch Level 2022-10-01 (October 1, 2022)
Size 5.3 GB
[quads id=2]
Brazil – ZTO Google Drive Mega
Brazil – Claro ZTA Google Drive Mega
Brazil – Vivo ZVV Google Drive Mega

How To Install Galaxy A31 SM-A315G/DS U1 Stock Firmware:

1: Download and Install the Samsung USB Driver on your computer.

2: Download and extract the  Galaxy A31 SM-A315G/DS U1 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.

8: Click the PDA button, and choose the Firmware.tar file.

9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you see the Pass message in Odin, you can disconnect your device from the pc.

When your Galaxy A31 SM-A315G/DS U1 finally boots up, you should now be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy A31 SM-A315G/DS U1 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
  • Phone must have a 70–80% charge.