The specific Galaxy A30s SM-A307G U5 Firmware Download Package comes with a Stock ROM of Galaxy A30s SM-A307G U5 Security Patch Level 2023-04-01 (April 1, 2023). This helps you to bypass the FRP lock and revert from the root and custom ROM.
This package contains all the necessary files that are required to install this firmware on your device. You may need to download the Odin software in order to flash this package on your phone. Follow the instructions below to flash this file on your device:
Samsung Galaxy A30s SM-A307G Binary 5 Android 11 Ecuador ALE A307GUBS5CWB1
There are various reasons to flash “Stock Firmware on Galaxy A30s SM-A307G U5“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
Pre-requirements:
- Supported Phone: Galaxy A30s SM-A307G U5
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy A30s SM-A307G U5 Stock ROM Details:
SM-A307G U5 Panama TPA A307GUBU5CWD1:
Model | SM-A307G Binary 5 U5, S5, Bit 5 |
Region / Country | Panama |
Language | Multi-Language |
Android version | Android 11 R |
Operator / Carrier | Clear TPA (no logo, carrier apps) |
AP / PDA | A307GUBU5CWD1 |
CSC | A307GOWO5CWD1 |
Modem CP Version / Baseband | A307GDXU5CWD1 |
product code | TPA |
Build Date | 2023-04-14 |
Security Patch Level | 2023-04-01 (April 1, 2023) |
Size | 4GB |
Panama TPA | Google Drive |
Argentina ARO |
Google Drive |
How To Install Galaxy A30s SM-A307G U5 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy A30s SM-A307G U5 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Once Odin detects your device, click the PDA button, and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy A30s SM-A307G U5 finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A30s SM-A307G U5 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
- Phone must have a 70–80% charge.