The specific Galaxy A23 SM-A235M U1 Firmware Download Package comes with a Stock ROM of Galaxy A23 SM-A235M U1 Security Patch Level 2022-11-01 (November 1, 2022). This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy A23 SM-A235M Binary 1 Android 13 T Panama TPA A235MUBU1BVL1
There are various reasons to flash “Stock Firmware on Galaxy A23 SM-A235M U1“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update Downgrade rest of Samsung FRP lock
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
Pre-requirements:
- Supported Phone: Galaxy A23 SM-A235M U1
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install Samsung USB Driver
- Download Odin’s Latest version
Galaxy A23 SM-A235M U1 Stock ROM Details:
SM-A235M U1 Panama TPA A235MUBU1BVL1:
Model | SM-A235M Binary 1 U1, S1, Bit 1 |
Region / Country | Panama / Panama |
Language | Multi-Language |
Android version | Android 13 T |
Operator / Carrier | Clear TPA (no logo, carrier apps) |
AP / PDA | A235MUBU1BVL1 |
CSC | A235MOWO1BVL1 |
Modem CP Version / Baseband | A235MUBU1BVK6 |
product code | TPA |
Build Date | 2022-12-06 |
Security Patch Level | 2022-11-01 (November 1, 2022) |
Size | 5.7 GB |
Download | Google Drive |
How To Install Galaxy A23 SM-A235M U1 Stock Firmware:
1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.
2: Download and extract the Galaxy A23 SM-A235M U1 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode a Warning Yellow Triangle Sign appeares . Press Volume Up to proceed.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button, and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy A23 SM-A235M U1 finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A23 SM-A235M U1 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
- Phone must have a 70–80% charge.