The specific Galaxy A23 SM-A235M/DS U1 Firmware Download Package comes with a Stock ROM of Galaxy A23 SM-A235M/DS U1 Security Patch Level 2023-02-01 (February 1, 2023). This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy A23 SM-A235M/DS Binary 1 Android 13 T Brazil ZTO A235MUBS1BWB1
There are various reasons to flash “Stock Firmware on Galaxy A23 SM-A235M/DS U1“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
Pre-requirements:
- Supported Phone: Galaxy A23 SM-A235M/DS U1
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install Samsung USB Driver
- Download Odin’s Latest version
Galaxy A23 SM-A235M/DS U1 Stock ROM Details:
SM-A235M/DS U1 Brazil ZTO A235MUBS1BWB1:
| Model | SM-A235M/DS Binary 1 U1, S1, Bit 1 |
| Region / Country | Brazil |
| Language | Multi-Language |
| Android version | Android 13 T |
| Operator / Carrier | Clean ZTO (no logo, carrier apps) |
| AP / PDA | A235MUBS1BWB1 |
| CSC | A235MOWO1BWB1 |
| Modem CP Version / Baseband | A235MUBU1BVK6 |
| product code | ZTO |
| Build Date | 2023-02-13 |
| Security Patch Level | 2023-02-01 (February 1, 2023) |
| Size | 5.7GB |
| Download | Google Drive |
How To Install Galaxy A23 SM-A235M/DS U1 Stock Firmware:
1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.
2: Download and extract the Galaxy A23 SM-A235M/DS U1 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.
8: Click the PDA button, and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy A23 SM-A235M/DS U1 finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A23 SM-A235M/DS U1 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
- Phone must have a 70–80% charge.
