Galaxy A22 SM-A225F Binary 3 Firmware

The specific Galaxy A22 SM-A225F U3 Firmware Download Package comes with a Stock ROM of Galaxy A22 SM-A225F U3 Security Patch Level 2022-09-01 (September 1, 2022). This helps you to bypass the FRP lock and revert from the root and custom ROM.

Samsung Galaxy A22 SM-A225F Binary 3 Android 12 Portugal MEO A225FXXU3BVI9

There are various reasons to flash “Stock Firmware on Galaxy A22 SM-A225F U3“. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to reset your phone hard and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

- Advertisement -

The Advantages Of Stock ROM:

  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty.

Pre-requirements:

Galaxy A22 SM-A225F U3 Stock ROM Details:

SM-A225F U3 Portugal MEO A225FXXU3BVI9:

Model SM-A225F Binary 3 U3, S3, Bit 3
Region / Country Portugal
Language Multi-Language
Android version Android 12 S
Operator / Carrier Clean MEO (no logo, operator apps)
AP / PDA A225FXXU3BVI9
CSC A225FOXM3BVI9
CP Version / Baseband Modem A225FXXU3BVI6
product code MEO
Build Date 2022-09-23
Security Patch Level 2022-09-01 (September 1, 2022)
Size 6.1 GB
[quads id=2]
Download Google Drive

SM-A225F U3 Portugal MEO A225FXXS3AVB2:

Model SM-A225F Binary 3 U3, S3, Bit 3
Region / Country Portugal
Language Multi-Language
Android version Android 11 R
Operator / Carrier Clean MEO (no logo, operator apps)
AP / PDA A225FXXS3AVB2
CSC A225FOXM3AUL3
MODEM CP Version A225FXXU3AUL1
product code MEO
Build Date 2022-02-07
Security Patch Level 2022-02-01 (February 1, 2022)
Size 5.6 GB
Download Android File Host Google Drive
Model SM-A225F U1, Bit 1, Binary 1
PDA A225FXXU3AUJ3
CSC A225FOLM3AUJ3
Operator / Carrier Clean ZTO (no logo, carrier apps)
Product code XXV
Android version Android 11 R
Size 5.7 GB
AFH OneDrive DropBox

How To Install Galaxy A22 SM-A225F U3 Stock Firmware:

Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the [highlight color=”yellow”]Galaxy A22 SM-A225F U3 Firmware[/highlight] files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you need to boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will be able to see a Warning Yellow Triangle Sign. In this situation, you have to press the Volume Up key to continue.

6: Now, Download and open Odin. Then, connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.

8: Once Odin detects your device, click on the PDA button and select the Firmware.tar file.

9: Now, click on the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once the Firmware process is completed, you will be able to see a Green Box with a Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see the Pass message in Odin, you can disconnect your Device from the computer.

The flashing process will begin and should take about 10–12 minutes. It may take some time for your device to reboot, but don’t be alarmed.

When your Galaxy A22 SM-A225F U3 finally boots up, you should now be running your desired firmware.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”

Disclaimer:

  • Please read and understand the Full Guide before flashing “Galaxy A22 SM-A225F U3 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from the use of the information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.
- Advertisement -