Galaxy A21 SM-A215U1 U7 Firmware – Android 12 S
The specific Galaxy A21 SM-A215U1 U7 Firmware Download Package has a Stock ROM of Galaxy A21 SM-A215U1 U7 Security Patch Level 2022-09-01 (September 1, 2022). This helps bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy A21 SM-A215U1 Binary 7 Android 12 United States USA XAA A215U1UEU7CVI3
There are various reasons to flash “Stock Firmware on Galaxy A21 SM-A215U1 U7“. For example, your Phone will be stuck or hang on the logo. You want to remove the FRP lock from it.
If you’re going to hard reset your Phone and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs on the Phone
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy A21 SM-A215U1 U7
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy A21 SM-A215U1 U7 Stock ROM Details:
SM-A215U1 U7 United States USA XAA A215U1UEU7CVI3:
Model | SM-A215U1 Binary 7 U7, S7, Bit 7 |
Region / Country | United States |
Language | Multi-Language |
Android version | Android 12 S |
Operator / Carrier | Clear XAA (no logo, carrier apps) |
AP / PDA | A215U1UEU7CVI3 |
CSC | A215U1OYM7CVI3 |
CP Version / Baseband Modem | A215U1UEU7CVI3 |
product code | XAA |
Build Date | 2022-09-07 |
Security Patch Level | 2022-09-01 (September 1, 2022) |
Size | 3.9 GB |
Download | Mega | Google Drive |
How To Install Galaxy A21 SM-A215U1 U7 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.
2: Download and extract the Galaxy A21 SM-A215U1 U7 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: After switching off the Phone, you need to boot into Download Mode. To boot into download mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you can see a Warning Yellow Triangle Sign. In this situation, you have to press the Volume Up key to continue.
6: Open Odin. Then, connect your phone to the pc.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.
8: Click the PDA button, and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once the Firmware process is completed you can see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy A21 SM-A215U1 U7 finally boots up, you should be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A21 SM-A215U1 U7 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from using information in this guide.
- Phone must have a 70–80% charge.