Galaxy A20s SM-A207M/DS U3 Firmware – Android 11 R

Galaxy A20s SM-A207M/DS Binary 3 Firmware

The specific Galaxy A20s SM-A207M/DS U3 Firmware Download Package comes with a Stock ROM of Galaxy A20s SM-A207M/DS U3 Security Patch Level 2022-12-01 (December 1, 2022). This helps you to bypass the FRP lock and revert from the root and custom ROM.

Samsung Galaxy A20s SM-A207M/DS Binary 3 Android 11 Brazil Vivo ZVV A207MUBS3CWC1

There are various reasons to flash “Stock Firmware on Galaxy A20s SM-A207M/DS U3“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Return to stock for warranty coverage.

Pre-requirements:

Galaxy A20s SM-A207M/DS U3 Stock ROM Details:

SM-A207M/DS U3 Brazil Vivo ZVV A207MUBS3CWC1:

Model SM-A207M/DS Binary 3 U3, S3, Bit 3
Region / Country Brazil
Language Multi-Language
Android version Android 11 R
Operator / Carrier Live ZVV
AP / PDA A207MUBS3CWC1
CSC A207MOWT3CVJ1
Modem CP Version / Baseband A207MUBS3CWC1
product code ZVV
Build Date 2023-03-23
Security Patch Level 2022-12-01 (December 1, 2022)
Size 3.7GB
[quads id=2]
Brazil ZVV Mega Google Drive
Brazil Vivo ZVV Mega Google Drive
SM-A207M/DS U3 Brazil Claro ZTA A207MUBU3CVJ1:
Model SM-A207M/DS Binary 3 U3, S3, Bit 3
Region / Country Brazil
Language Multi-Language
Android version Android 11 R
Operator / Carrier clear ZTA
AP / PDA A207MUBU3CVJ1
CSC A207MOWA3CVJ1
Modem CP Version / Baseband A207MUBU3CVJ1
product code ZTA
Build Date 2022-10-29
Security Patch Level 2022-10-01 (October 1, 2022)
Size 4GB
Brazil – ZTA Mega Google Drive
Brazil – Tim ZTM Mega Google Drive

How To Install Galaxy A20s SM-A207M/DS U3 Stock Firmware:

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the  Galaxy A20s SM-A207M/DS U3 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: Boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Once Odin detects your device, click the PDA button, and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you see the Pass message in Odin, you can disconnect your device from the pc.

When your Galaxy A20s SM-A207M/DS U3 finally boots up, you should now be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy A20s SM-A207M/DS U3 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
  • Phone must have a 70–80% charge.

About Asim

Always had a strong interest in the Android operating system. Experience with Git and self-hosted WordPress blogs led him to the understanding that an online presence was the logical next step for his business. It's about uniqueness and individuality!

Leave a Reply

Your email address will not be published. Required fields are marked *