SM-A205U1 Binary 11 Firmware

The specific Galaxy A20 SM-A205U1 U11 Firmware Download Package has a Stock ROM of Galaxy A20 SM-A205U1 U11 Security Patch Level 2022-04-01 (April 1, 2022). This helps bypass the FRP lock and revert from the root and custom ROM.

Advertisement

Samsung Galaxy A20 SM-A205U1 Binary 11 Android 11 R United States XAA A205U1UESBCVD3

There are various reasons to flash “Stock Firmware on Galaxy A20 SM-A205U1 U11“. For example, your Phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to hard reset your Phone and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the Phone
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy A20 SM-A205U1 U11 Stock ROM Details:

SM-A205U1 U11 United States XAA A205U1UESBCVD3:

Model SM-A205U1 Binary 11 U11, S11, Bit 11
Region / Country United States
Language Multi-Language
Android version Android 11 R
Operator / Carrier Clean XAA (no logo or carrier apps)
AP / PDA A205U1UESBCVD3
CSC A205U1OYMBCVD3
CP Version / Base Band Modem A205U1UESBCVD3
product code XAA
Build Date 2022-04-20
Security Patch Level 2022-04-01 (April 1, 2022)
Size 3.95 GB
[quads id=2]
Download Google Drive Android File Host

How To Install Galaxy A20 SM-A205U1 U11 Stock Firmware:

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the  Galaxy A20 SM-A205U1 U11 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the Phone, you need to boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you can see a Warning Yellow Triangle Sign. In this situation, you have to press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.

8: Once Odin detects your device, click on the PDA button and select the Firmware.tar file.

9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your Galaxy A20 SM-A205U1 U11 finally boots up, you should now be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy A20 SM-A205U1 U11 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from the use of the information in this guide.
  • Phone must have a 70–80% charge.