The specific Galaxy A20 SM-A205G U8 Firmware Download Package has a Stock ROM of Galaxy A20 SM-A205G U8 Security Patch Level 2020-12-01 (1 December 2020). This helps bypass FRP lock and revert from the root and custom ROM.
Samsung Galaxy A20 SM-A205G Binary 8 Android 10 Q Brazil ZTO – A205GUBS8BTL2
There are various reasons to flash “Stock Firmware on Galaxy A20 SM-A205G U8“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
Pre-requirements:
- Supported Phone: Galaxy A20 SM-A205G U8
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy A20 SM-A205G U8 Stock ROM Details:
SM-A205G U8 Brazil ZTO – A205GUBS8BTL2:
| Model | SM-A205G Binary 8 U8, S8, Bit 8 |
| Region / Country | Brazil |
| Language | Multi-Language |
| Android version | Android 10 Q |
| Operator | Clean ZTO (without logo, operator apps) |
| PDA | A205GUBS8BTL2 |
| CSC | A205GOWO8BTL1 |
| Product code | ZTO |
| Build Date | Wed, 09 Dec 2020 |
| Security Patch Level | 2020-12-01 (1 December 2020) |
| Size | 3 GB |
| Download | Google Drive | Android File Host |
Download Galaxy A20 SM-A205G U8 Boot.img
boot.img A20 SM-A205G A205GUBS8BTL2 to root on Magisk without TWRP
How To Install Galaxy A20 SM-A205G U8 Stock Firmware:
1: Download and Install Samsung USB Driver on your computer. If a Samsung USB Driver is already installed on your computer, then Skip this Step.
2: Download and extract the Galaxy A20 SM-A205G U8 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: You can see a Warning Yellow Triangle Sign in the Download mode. In this situation, you have to press the Volume Up key to continue.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once the Firmware process is completed, you will see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
You should run your desired firmware when your Galaxy A20 SM-A205G U8 finally boots up.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A20 SM-A205G U8 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.
