Galaxy A20 SM-A205G U6 Firmware – A205GUBS6BTE1

Galaxy A20 SM-A205G U6 Firmware

The specific Galaxy A20 SM-A205G U6 Firmware Download Package has a Stock ROM of Galaxy A20 SM-A205G U6. This helps bypass FRP lock and revert from the root and custom ROM.

Galaxy A20 SM-A205G Binary 6 Firmware – A205GUBS6BTE1

There are various reasons to flash “Stock Firmware on Galaxy A20 SM-A205G U6“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy A20 SM-A205G U6 Stock ROM Details:

Model SM-A205G Binary 6 U6, S6, Bit 6
Region / Country Brazil
Language Multi-Language
Android version Android 10 Q
Operator Clean ZTO (without logo, operator apps)
PDA A205GUBS6BTG1
CSC A205GOWO6BTG1
Product code ZTO
Build Date Thu, 02 Jul 2020
Security Patch Level  2020-07-01 (1 July 2020)
Size 3 GB
[quads id=2]
Download 4File Google Drive Android File Host

How To Install Galaxy A20 SM-A205G U6 Stock Firmware:

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, then Skip this Step.

2: Download and extract the Galaxy A20 SM-A205G U6 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Open Odin. Then, connect your phone to the pc.

7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed, you will see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

You should run your desired firmware when your Galaxy A20 SM-A205G U6 finally boots up.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy A20 SM-A205G U6 Firmware.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.